Our Brand Products

KRTU - Submerisible Motor Pumps for Sewage

Applications

KRTU pumpsets are used for handling all kinds of waste water in:

Municipal sector

Industrial sector

Design

KRTU pumps are single stage, submersible centrifugal pumps of closed coupled (monobloc) construction. They are available with three types of impellers - E (single vane) K (non-clog two channel ) and F (free flow) for two types of installations, namely transportable and stationary.

Operating data

Design

Three phase induction motor for operating voltage of 380 V and 415 V, insulation class F with built - in temperature protection.

Shaft sealing

KRTU 65 :
KRTU 100 :
Part Name KRTU 65 KRTU 100
Pump casing C.I C.I
Impeller C.I C.I
Shaft Carbon steel Carbon steel
Motor casing C.I C.I
Shaft protection sleeve - Stainless steel
Guide rope Stainless steel Stainless steel
KRTU

Vertical monobloc Dewatering Pumps - Ama® Porter

Features

  • Vertical , mono bloc submersible pump set
  • Free flow impellers of two sizes
  • 1Ø and 3Ø motors with IP 68 protection, class ‘F’ insulation
  • 1 phase motor with built-in thermal overload protection and float switch
  • Bi- directional mechanical seal
  • Easy and less maintenance due to SS hardware

Applications

  • Pumping of surface water, rain water, waste water containg soilds.
  • Drainage of sumps liable to flooding
  • Drainage of basements, underground bunkers, cable trenches in industries, hotels etc.
  • Municipal pits
  • Construction sites

Operating Data

Size DN 50 mm
Capacity Up to 29 m 3/hr
Head Up to 16 m
Motor rating 1Ø - 1.1 kw / 3Ø - 1.5 kw
Operating Temp Up to 40°

Material of Construction

Technical Data and Section Table

Model 1Ø, 220/240 V Motor Rating (KW) Rated current (AMP) Cable size (mm2) Weight (KG)
501 SE 0.75 6 3 × 1 22
503 SE 1.1 8 3 × 1 22
Model 1Ø, 380/415 V Motor Rating (KW) Rated current (AMP) Cable size (mm2) Weight (KG)
501 ND 0.75 2.4 4 × 1 22
503 ND 1.5 3.5 3 × 1 22

Discharge (m3/hr)

5 10 15 20 25 29

Total heads (mtrs)

Model 1Ø, 220/240 V
501 SE 11 9 7 4 - -
503 SE 15 13 11 9 6 4
Model 3Ø, 380/415 V
501 SE 11 9 7 4 - -
503 SE 15 13 11 9 6 4
Amaporter

Sub Mersisible Waste Water Pumps

Field of Application

  • Automatic drainage of pits, shafts, yards and cellars at risk of flooding
  • Lowering the surface water level
  • Drainage of underground passages
  • Extraction of water from rivers and reservoirs
  • Disposal of highly contaminated, fibre-containing water, e.g. from laundries, common washing facilities, washing - machines and dish washers (incl. hot water cycle), industrial businesses

Fluid Handled

Ama-Drainer /10, /11 - Standard variant for waste water

Slightly contaminated water, also containing solid particles with a particle size of up to 10 or 11mm

Ama-Drainer /35 - Variant for waste water

Waste water containing long fibres and substances liable to twist and bunch, also soild particles with a particle size of up to 35mm

Ama-Drainer C - Variant for aggressive water
  • Transport of seawater or water containing salt
  • Transport of swimming pool water and brackish water
  • Transport of aggressive waste water containing solids with a particle size of up to 35mm
Ama - Drainer R - Variant for water containing oil / oil emulsions
  • Transport of oil emulsions and cutting oils
  • Disposal of waste water containing oil

Operating Data

Q up to 50 m3/h, 14 I/s

H up to 21 m

t up to 40 oC; up to max.3minutes; 90 oC

Shaft Seal

Ama - Drainer Impeller end Motor end
All pump sizes 1 mechanical seal 1 shaft seal ring

Drive

  • Ama-Drainer /10 and /35 NE/SE : Single - phase a.c. motor with integrated
  • Temperature switch, power supply cable and shockproof plug.
  • Ama - Drainer /10, /11 and /35 ND: Three - phase motor with integrated temperature switch power supply cable and CEE plug (3L+PE+N) including motor contactor and phase inverter.
  • Ama - Drainer /10, /11 and /35 ND : Three - Phase motor with integrated temperature switch, power supply cable without plug and with protective cap.
Ama Drainer

Multistage Submersible Motor Pump sets

Applications

  • Domestic water supply
  • Irrigation
  • Fire protection systems
  • Fountains

Design features

  • Stage casing with wear ring
  • Superior chrome steel rotor shaft
  • Rewindable water filled motor
  • Tilting pad type thrust bearing
  • Copper rotor

Material of construction

Pump / Stator jacket - Stainless Steel

Suction Casing - Cast Iron

Stage Casing - Noryl with SS wear ring

Impeller - Noryl

Shaft / Coupling Steele - Chrome Steel

Bearing / Valve Body - Cast Iron

Winding Wire - Polywrap Copper

Thrust Bearing - Carbon vs Cr. Steel

Shaft Seal

Ama - Drainer Impeller end Motor end
All pump sizes 1 mechanical seal 1 shaft seal ring

Drive

  • Ama-Drainer /10 and /35 NE/SE : Single - phase a.c. motor with integrated
  • Temperature switch, power supply cable and shockproof plug.
  • Ama - Drainer /10, /11 and /35 ND: Three - phase motor with integrated temperature switchm power supply cable and CEE plug (3L+PE+N) including motor contactor and phase inverter.
  • Ama - Drainer /10, /11 and /35 ND : Three - Phase motor with integrated temperature switch, power supply cable without plug and with protective cap
Cora 75

V6 / V8 Pump Set

KSB V4 PUMPS (Suitable for 4" Bore well and above)

Model H.P Power Head Range Discharge Range Outlet size
Cora 1 C 0.5 to 2.0 Single Phase 16 to 275 0500 to 1800 1.1/4"
Cora 1 C 1.0 to 2.0 Three Phase 16 to 275 0500 to 1800 1.1/4"
Cora 1 C 0.5 to 3.0 Single Phase 15 to 245 1100 to 2800 1.1/4"
Cora 2 C 1.0 to 4.0 Three Phase 24 to 273 1100 to 2800 1.1/4"
Cora 4 C 0.75 to 3.0 Single Phase 16 to 136 2000 to 6000 1.1/2"
Cora 4 C 1.0 to 6.0 Three Phase 19 to 297 2000 to 6000 1.1/2"
Cora 7 C 1.0 to 3.0 Single Phase 11 to 78 4000 to 10000 1.1/2"
Cora 7 C 1.5 to 7.5 Three Phase 15 to 210 4000 to 10000 1.1/2"
Cora 18 C 2.0 to 3.0 Single Phase 8 to 40 9000 to 24000 2"
Cora 18 C 2.0 to 7.5 Three Phase 11 to 99 9000 to 24000 2"

KSB V6 PUMPS (Suitable for 6" Bore well and above)

Model H.P Power Head Range Discharge Range Outlet size
UQD 112 5.0 to 12.5 Three Phase 72 to 335 3000 to 9000 2"
UQD 152 3.0 to 17.5 Three Phase 25 to 326 5000 to 14000 2"
UQD 182 5.0 to 25.0 Three Phase 41 to 358 6000 to 18000 2"
UQD 212 5.0 to 25.0 Three Phase 30 to 271 10000 to 24000 2"
BPD 242 5.0 to 25.0 Three Phase 20 to 212 12000 to 36000 2.1/2"
BPD 273 5.0 to 25.0 Three Phase 15 to 124 20000 to 50000 3"
BPD 302 6.0 to 25.0 Three Phase 9 to 117 30000 to 75000 3"

KSB V7 PUMPS (Suitable for 7" Bore well and above)

Model H.P Power Head Range Discharge Range Outlet size
BPD 322 6.0 to 25.0 Three Phase 8 to 90 40000 to 85000 4"

KSB V8 PUMPS (Suitable for 8" Borewell and above)

Model H.P Power Head Range Discharge Range Outlet size
BPHA 333 15.0 to 41.0 Three Phase 33 to 129 40000 to 110000 4"
BPHA 373 15.0 to 41.0 Three Phase 14 to 69 80000 to 170000 6"
BPHA 384 15.0 to 41.0 Three Phase 24 to 113 50000 to 130000 5"
UPHA 293 71.0 to 162.0 Three Phase 71 to 162 25000 to 55000 2.1/2"
v6 / v8

Self priming Mono block Pump set

Features

  • Self Priming
  • Compact sleek design
  • Wide voltage range 180 V-240 V
  • Fitted with Thermal Overload Protector
  • Suction lift up to 6m possible
  • Bronze impeller
  • High quality and long life mechanical steel

Applications

  • Pumping of water to overhead tank bungalows
  • Drinking water supply
  • Ornamental Fountains
  • Farm House
Hydrobloc

Super suction Monoblock Pump set - Hydrostar

Features

  • For water supply to bungalows Flats, Hotels, Hospitals,etc.
  • Gardening and Small Plants
  • Sprinklers
  • Booster applications
  • Overhead tanks

Features

  • Designed for wide voltage fluctuations.
  • Mongonese bronze/brass impellers for smooth operation
  • Self priming upto 8 mtrs
  • Noiseless operation
  • Low power consumption
  • Motor TEFC with Class B insulation
  • Sealed ball bearings (packed for life)

Operating data

  • Models : 03 Nos.
  • Pump size : 25 x 25 mm
  • Capacity : Up to 3100 lph
  • Head : Up to 30 mtrs
  • Power : 0.37 / 0.5 (kw/hp)
Hydrobloc

Submersible Openwill Mono bloc Pump sets - MONOSUB R

Product

KSB, a leading manufacturer of pumps offers its clients the latest pumping technology through a variety of pumpsets designed for the future. KSB Submersible Monobloc pumpsets can be installed in openwell and sumps. These pumps are made using sophisticated and advanced manufacturing processes to ensure top class performance of the pumps.

Operating data

  • Flood irrigation through Openwell & Dugwells
  • Irrigation through sprinklers and drip systems
  • Community water supply
  • Water supply to bungalows & high rise buildings
  • Household water supply - Single Phase pumps
  • Industrial water supply
  • Cooling circuits in HVAC
  • Decorative fountains
  • De - watering of basement storm water

Material of construction

Casing - Cast Iron

Impeller - Cast Iron

Shaft - Steel

Motor body - Cast Iron for MREG / MRXG models

Operating / Technical data

Model Single phase Three Phase
Capacity up to 44 IPM 1800 IPM
Head up to 33m 70m
Nominal speed 2800 rpm 2800 rpm
Motor rating 0.5 - 2.0 HP 3.0 to 10.0 HP
Power supply 220V + 6%, -15% / 50 Hz 400V + 6%, - 15% / 50 Hz
Cable size 1.5 mm sq Upto 5 HP - 2.5 mm sq for DOL - 1.5 mm sq for SD 7.5 & 10 HP - 2.5 mm sq

Special features

  • Designed for best possible hydraulic efficiency - motor optimum ally loaded
  • Dynamically balanced rotating assembly - vibration free - longer life
  • Designed to operate at low voltage conditions - stable performance
  • Highly durable water cooled re-windable mottor - easy maintenance
  • Double counter bearings - better stability, no vibrations
Monosub